Re: Error eMMC 99.39.73 - HP Support Community

Samuele-ITHSAPA · ‎05-13-2019

Hi, this morning when when I turned on the printer the following message appeared on the display:

Error: 99.39.73

eMMC Read Only

and it's no possibly to use the printer.

How can I solve it?

Thank you.

Kind regards,

Samuele.

Samuele Pasquini

Alex-TATS · ‎05-13-2019

Hi Samuele,

1) Open the formatter cover and then reseat the eMMC PCA.

2) Then go to the pre-boot menu and do a format disk.

3) Download the latest firmware in a usb thumbdrive (formatted in FAT32) in its root directory.

4) Then in the pre-boot menu, download/install the firmware from the usb thumbdrive

5) Let the printer boot by selecting continue

I hope this may help,

Cheers!

ALEX-TATS
Printer Engineer for a HP Platinum Partner
I am not a HP employee
If you found this post helpful, you can let others know by clicking the “Accept as Solution” button. You can also show your appreciation, with a kudos, by clicking the “Thumbs up" button!

Repairatrooper · ‎05-13-2019

If the first post does not solve the problem then likely you will need to replace the emmc card.

If you find the information provided useful or solves your problems, help other users find the solution easier by marking my post as an accepted solution. Clicking "yes" on "was this reply helpful" also increases the chances that this solution will help others.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.

Error eMMC 99.39.73

Create an account on the HP Community to personalize your profile and ask a question