3rd Camera Setup

Anonymous · ‎01-27-2020

We have the following equipment: G7500, Director II with 2 Eagle Eye IV Camera's connected to two 86" tv's setup as a zoom room. We want the "Classroom" configuration where there is a third camera at the back of the room facing toward the presenter. Idea would be to switch manually between the back camera and the Director II. We can view the Eagle Eye IV HDCI camera when manually clicking switch but are unable to get the camera to pan, tilt or zoom as the settings are unavailable. What do we need to do to get this to work?

mshu1 · ‎01-28-2020

Hi @ it@fairlygroup.com,

USB and HDCI cam in parallel doesn´t work. And in addition,support for two cameras is not officially announced/supported for G7500.

Anonymous · ‎01-28-2020

Mshu,

Thank you for the reply. We have a Director II and a Poly Cube camera connected to the G7500 and functioning as expected. The Director II is in the front of the room capturing the audience and a Cube camera in the back of the room. We're able to switch and control either camera in the front (Director) and rear (Cube) with zoom. It work's really well but the rear camera could be better.

Our hope is to upgrade the Cube camera to something comparable to the Eagle Eye 12x cameras on the Director II.

SteffenBaierUK · ‎01-29-2020

Hello it@fairlygroup.com ,

Welcome to the Poly Community.

This would need to come into Poly as a feature request via a Poly Sales Engineer or Poly reseller.

Please ensure to provide some feedback if this reply has helped you so other users can profit from your experience.

Best Regards

Steffen Baier

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN

Anonymous · ‎03-06-2020

Hi it@fairlygroup.com,

Do you try to use Eagle-Eye director II with usb, and Eagle-Eye 4 12x with the HDCI connector.

or a Eagle Eye 4 USB 12x camera with Eagle eye director 2

Looks interesting on the setup. Will try it if have chance.

Create an account on the HP Community to personalize your profile and ask a question