• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We are proud to announce new Poly Studio Series video bars and remote room control with Poly Connect. Read more about the solutions!
Locked

‎01-14-2024 03:42 AM

HP Recommended

Please share the product data sheet and drawings for Poly GC 8

2 REPLIES 2

‎01-15-2024 06:12 AM

HP Recommended

Hi @NishadIbrahim,

Welcome to Hp Poly community!

Below is the procedure to set up Poly GC8:
 

Procedure

  1. Remove the bottom panel of the Poly GC8.
    1. Loosen the bottom panel screw using a #1 Phillips-head screwdriver.

Line drawing of the Poly GC8 face-down with the bottom cover facing forward. A screw driver turns left to loosen the screw located in the slot in the bottom cover.

  1. Press the rubber circles located on the left and right side of the bottom pane, l and slide the panel up to remove it.

If the retaining screw causes the cover to seem stuck, try one of the following:

  • Turn the Poly GC8 so the bottom panel is facing down as you slide off the bottom panel.
  • Push up with one hand while using the screwdriver to turn the retaining screw counterclockwise.

Line drawing of a Poly GC8 controller face-down with the bottom facing forward. The cover removes by pressing the two circles on both sides of the Poly GC8 bottom cover. The two circles include three raised lines in the middle. After pressing the circles push up on the bottom cover to remove it.

  1. Using a flathead screwdriver, loosen the cable guard screw and remove the cable guard.

Line drawing of a Poly GC8 controller face-down with the bottom facing forward. The bottom cover is removed. A flathead screwdriver turns left to loosen the screw on the cable guard.

  1. Connect the cables to the Poly GC8.
    1. Connect the USB-C connector of the supplied USB-A to USB-C cable to the Poly GC8.
    2. Connect the power cable to the Poly GC8.
    3. If you want to allow users to share content in a conference, connect the mini-HDMI connector of the mini-HDMI to HDMI cable to the Poly GC8.
    4. Connect the GC8 3.5 mm audio out connection to an audio output device.
  2. Reattach the cable guard and the bottom panel.

Line drawing showing the Poly GC8 bottom cover being installed. The USB-C, mini-HDMI, and power cable are attached to the Poly GC8. The cover installs by placing the GC8 face-down on a table and sliding the bottom cover downward.

  1. Connect the USB-A connector of the USB-A to USB-C cable to the Conferencing PC.

Line drawing showing a Poly solutions for Microsoft Teams Rooms computer connected to a Poly GC8 using a USB-A to USB-C cable. The USB-A end of the cable connects to the computer and the USB-A end of the cable connects to the Poly GC8.
Refer: https://docs.poly.com/bundle/mtr-sg-current/page/c4908001.html#t4774716__v4774717

You can also refer: https://youtu.be/y2g719CaRqI?si=tU1Ioq6IWkWugyUO

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.

Regards,
Prajwal

 

Was this reply helpful? Yes No

‎01-15-2024 07:57 AM

HP Recommended

Hello @NishadIbrahim ,

 

welcome to the HP Poly community.


The Data sheet should be an attachment via the product Support Page for the GT10-T >here<

 

The "old" Video FAQ contained:

 

Sep 05, 2016 Question: Where can I find Dimensional Drawings for Poly systems and accessories?
Explanation: Please check => here <=

 

Not sure if the Link to the new HP Knowlegde base already contains this. Have a search in the attached documents and if this fails please try and search the >Wise< database (needs login). If this fails work with a Poly reseller.

 

Best Regards

 

Steffen Baier

------------------------------------------------
Notice: I am an HP Poly employee but all replies within the community are done as a volunteer outside of my day role. This community forum is not an official HP Poly support resource, thus responses from HP Poly employees, partners, and customers alike are best-effort in attempts to share learned knowledge.
If you need immediate and/or official assistance for former Poly\Plantronics\Polycom please open a service ticket through your support channels
For HP products please check HP Support.

Please also ensure you always check the General VoIP , Video Endpoint , UC Platform (Microsoft) , PSTN
Was this reply helpful? Yes No
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.