After initial set up, I can only print when I select the HP-set up wifi network.

[hankshw]

Even after initial set up of my wireless printer, I can only print when I select the HP set up wifi network. Therefore, I have to go off of my home network every time I want to print. Is there a way to ensure my computer and printer are on the same network to print seamlessly? 

[Kumar0307]

@hankshw, Welcome to the HP Support Community!

It seems like you have connected the printer and the MAC using WiFi Direct. While printing via WiFi Direct, you will not have the Internet access on the MAC.

Connect the printer to your wireless network

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Print a Network Configuration Page to make sure that the printer is on the same network as the computer.

On the printer's control panel, press the Wireless button  and the Information button  at the same time.

Install the printer using AirPrint driver

Please ensure that the printer is up to date with its firmware and Mac is up to date with its software. If you are unsure you may use the links below to update the printer firmware and Mac software:

Update printer firmware

Update software on Mac 

1.) Click the Apple menu, click System Preferences, and then click Print & Scan or Printers & Scanners.

2.) Check if your printer name displays in the Printers list, If your printer is listed, click the printer name, click the minus sign to delete the printer.

3.) If you see multiple printer queues for the same printer, remove all extra printers by selecting them one at a time, and then clicking the minus button at the bottom of the list.

4.) Click the plus sign , click Add Printer or Scanner, click the printer name.

5.) Click the Use or Print Using menu, select AirPrint in the pop-up menu. Then click Add.

6.) Try to print.

Let me know how this goes.

If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!