cancel
Showing results for 
Search instead for 
Did you mean: 
DanPalGR
New member
4 3 0 0
Message 1 of 7
505
Flag Post

Cannot connect to Web services

HP Recommended
LaserJet Pro MFP M127fn
Microsoft Windows 10 (64-bit)

I recently switched to a new ISP, and now I cannot connect to Web Services.  I can connect to the printer on my LAN using the printer's static IP address.  I go to the HP Web Services tab and click on enable.  After 'spinning' for about 40 seconds I get the message "Connection error. Check internet connection."

We have had this new ISP for about 3 weeks now with no other connection issues.

6 REPLIES 6
sandytechy20
HP Support Agent
HP Support Agent
25,736 25,616 1,414 1,485
Message 2 of 7
Flag Post
HP Recommended

@DanPalGR

 

Welcome to HP support community.

 

If this issue started after changing the Wireless router, follow the below steps:

Check the router band setting:

Many routers can operate in both 2.4 GHz and 5.0 GHz frequency bands, but not all HP printers support both bands. Make sure the 2.4 GHz router band is enabled and broadcasting. If the router broadcasts separate network names (SSIDs) for each band, connect the printer to the 2.4 GHz band SSID.

 

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
DanPalGR
Author
New member
4 3 0 0
Message 3 of 7
Flag Post
HP Recommended

My printer has a wired cat5 connection (not wireless).  I am using my same router, just a different modem box for the new ISP.

0 Kudos
sandytechy20
HP Support Agent
HP Support Agent
25,736 25,616 1,414 1,485
Message 4 of 7
Flag Post
HP Recommended

@DanPalGR

 

Update the printer firmware

Here are the steps:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
DanPalGR
Author
New member
4 3 0 0
Message 5 of 7
Flag Post
HP Recommended

There are no firmware updates listed for my printer.  Could the ip address or eprint site address be blacklisted by my new ISP?  What would I ask my ISP to check regarding blacklisted or blocked sites?

0 Kudos
sandytechy20
HP Support Agent
HP Support Agent
25,736 25,616 1,414 1,485
Message 6 of 7
Flag Post
HP Recommended

@DanPalGR

 

I request you to talk to HP support.

They might have multiple options to help you with this.

  1. Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true
  2. Select the country.
  3. Enter the serial of your device.
  4. Select the country from the drop-down.
  5. Click on "Show Options".
  6. Fill the web-form. A case number and phone number will now populate for you.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
DanPalGR
Author
New member
4 3 0 0
Message 7 of 7
Flag Post
HP Recommended

Following these instructions does not give me an option to fill out a web form. 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation