Got new wifi. How do I get DeskJet 2632 printer to recognise it?

[DoctorDave58]

Recently upgraded my Sky wifi but HP printer DeskJet 2632 now won't print. Appears not to recognise new wifi network. How do I change it?

[Kumar0307]

@DoctorDave58, Welcome to the HP Support Community!

To connect the printer to the wireless network, use the WPS method.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

• Make sure the printer and the PC are connected to the same wireless network.
• This printer supports only 2.4GHz network. So, the PC should be on the 2.4GHz network.
• If you have a Dual-band router and both 2.4GHz and 5GHz networks share the same name/SSID, the printer will not be able to connect to the network. In this case, contact your Internet service provider to assign different names to both the networks.

For more info on how to connect the printer to the new network, refer to this document - No Connection after Router or Wi-Fi Settings Change

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!