HP Deskjet 3050A printer is not printing from the laptop

[29June1991-1]

My  printer seems to be connected alright but it does not print anything that I send it from the laptop. It does scan and copy OK.

When I try troubleshoot it says that there were two issued and the system xorrecred but when I try send something else to the printer the same happens. I have cleared it several times with no success. It doesn't even print the test page.

Can someone please tell me what to do? Please bear in mind that I am not very good at these things...

Thank you

Emilia

[Jeet_singh]

@29June1991-1,

Welcome to the HP Forums 🙂 I would like to take a moment and thank you for using this forum, it is a great place to find answers. For you to have the best experience on the HP forum, you could also visit our HP Forums Guide for First Time Here? Learn How to Post and More. I see from your post that you're having issues while printing from your HP DeskJet printer. Don't worry we'll work together to help you find a solution.

To provide you with an accurate solution, I'll need a few more details:

Have you recently made any changes before the issue started?

Are you trying to print the test page from the printer or from the computer?

Have you tried to run the HP Print and Scan Doctor?

Perform a hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you are facing any issue while using the printer then try using HP Print and Scan Doctor (PSDR). PSDR is an automated tool which can diagnose and resolve printing and scanning problems. Please go to this link: HP Printers - Using HP Print and Scan Doctor (Windows)  to download and run HP PSDR. Once you open the program, select your printer and click on “Fix Printing” to automatically diagnose and fix the issue.

If you're running Windows, I would suggest you uninstall the printer drivers from the root level and then reinstall them by following the below steps:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and ok - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP DeskJet printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here (Please select the Operating system and version of Windows before downloading and installing the printer software).
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Please let me know if this resolves the issue, or if you require further assistance!

Eagerly waiting for your response!

that said, If the information I've provided was helpful, 

give us some reinforcement by clicking the solution and kudos buttons, 

that'll help us and others see that we've got the answers!

Good Luck.