cancel
Showing results for 
Search instead for 
Did you mean: 
Al155
New member
1 0 0 0
Message 1 of 2
114
Flag Post

HP Tango is not connecting to my wi-fi. It was connected previously but is not today.

HP Recommended
HP Tango
Microsoft Windows 10 (64-bit)

Rotating blue light.  WiFi is on. HP Smart is installed.

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
13,785 13,753 1,125 1,246
Message 2 of 2
Flag Post
HP Recommended

Hi @Al155

 

Welcome to the HP Support Community. I'd be happy to assist you with the  "*Wireless setup" issue. 

 

 Use WPS to connect the printer to your wireless network.

  1. Locate the WPS button on your router, but do not press it yet.

    If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

  2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

  3. HP Tango printers: Press and hold the Wireless and Power buttons on the back of the printer for 5 seconds. The Edge lighting flashes blue to indicate the printer is in WPS mode.

  4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

  5. Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

 

Hope this helps! Keep me posted. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

 

Have a great day! 

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation