cancel
Showing results for 
Search instead for 
Did you mean: 
The HP Calculator Community Message Board is moving. While we prepare for the move, we are unable to accept new postings. During the move, you can look for help from other users by visiting https://www.hpmuseum.org/ . Or if you need technical support for your calculator visit: HP Calculators. .
MartyMcG
New member
5 2 0 0
Message 1 of 2
164
Flag Post

HP4655 won't direct print

HP Recommended
HP4655
Microsoft Windows 10 (64-bit)

Hi:

Trying to troubleshoot printer for friend.  Printer will not connect to TP-Link 5G router (Archer C2600).  Does not see TP-Link 2G.  Figure work around was WiFi direct print.  Per HP Smart it is turned on and pin = 12345678.  When I attempt to connect to the printer's wifi signal, from a laptop,  it says incorrect pin.  What am I missing.  

Second question is a separate app needed for using above?

Thanks

 

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
15,012 14,973 1,212 1,366
Message 2 of 2
Flag Post
HP Recommended

Hi @MartyMcG,

 

I'd like to help!

 

I understand you are unable to connect the printer to the network.

 

The OfficeJet 4655 Printers supports 802.11 b/g/n – 2.4 GHz networks only.

 

You may refer to the printer specifications to know the printer features.

 

Connect the printer to the Wi-Fi network (printers with a touchscreen)

Use the Wireless Setup Wizard from the printer control panel to connect the printer to your Wi-Fi network.

 

  1. Place the printer near the network router.

  2. Make sure paper is loaded in the main tray, and then turn on the printer.

  3. From the Wireless  or Setup  menu, select Network setup or Settings, and then select Restore Network Settings.

  4. Get the network name and password. Go to Find the wireless network password or PIN to connect an HP printer for more information.

  5. From the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard.

  6. Select your network, and then enter the password.

    NOTE: 

    If the Wireless Setup Wizard is not listed, select Wi-Fi Protected Setup or WPS, select Push Button, and then follow the steps to connect to the network.

 Also, refer to -HP printer setup (Wi-Fi Direct)

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation