How to connect an HP 2544 to the wifi

[Peter168]

printer not connecting to the hub

[Riddle_Decipher]

@Peter168 Greetings from the HP Community! Here's all you need to know about setting up your HP printer on a wireless (Wi-Fi) network.
These steps apply to first time connections, new router or ISP setup, or to restore a lost connection.

Step 1: Prepare for installation

Check the requirements, turn on the computer and the router, and set up the printer.

1. To use your printer on a wireless network, you need the following items:

   • A computer connected to your wireless network

   • Internet access: HP recommends broadband Internet access for software downloads, using Web Services, and getting printer updates.

2. Make sure the router and computer are turned on.

3. Make sure the computer is connected to the same wireless network that the printer is connected to.

4. Set up the printer, load paper into the input tray, and install the toner cartridges. For more information about setting up the printer, go to First Time Printer Setup.

5. Turn on the printer and place it within range of the router during the setup procedure.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2 ONWARD

(By the end of this article all the issues should be resolved)

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!