How to reconnect wi if printer after changing from Talk Talk to BT broadband

[Broderer]

Having changed from Talk Talk to BT my printer will not work with wi fi

i have an Apple iPad  and a Lenovo lap top

both worked before the change 

[banhien · Accepted solution]

Hi,

Welcome to HP Support Forum. Please use the following instructions to fix:

   http://www8.hp.com/au/en/campaigns/wireless-printing-center/reconfiguring-system-help3.html

Please also note: Your printer supports 2.4GHz only therefore you need to check and allow your router to broadcast both (dual) bands which are 2.4GHz and 5.0GHz.

Regards.

[ShlomiL]

Hi,

Hae you configured your pritner for the new router?

Reset the network settings by holding both the wifi and cancel buttons for 3 seconds, next turn the printer off and back on.

On your lenoveo PC go to Devices and Printers, right click any listed HP Deskjet 2540 icon and select Remove Device.

Next opent eh HP Deskjet 2540 software from your desktop or under Start > All Apps > HP and select connect a new printer by selecting a wireless connection.

Depending on your PC connectivity and capabilities the HP software might be able to reconfigure your printer automatically and might ask for a temporary USB cable if required to set the printer.

Once the device configuration completes the wireless light should solid lit.

Regards,

Shlomi