Login and password administrator

[Tervee]

How can I get an admin password and login for hp705a0f6eadba.local. ?

[Jeet_singh · Accepted solution]

Hi @Tervee,

Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips!

I understand your printer is asking for an administrator password. Is the printer connected to the network already? If so, let’s try to fix the issue by following the steps mentioned below:

• Obtain the IP address of the printer – You can touch the “wireless” icon on the printer control panel to get the IP address.
• Type the IP address on your web browser to obtain the printer EWS page on your computer.
• Now go to the Security Tab - Administrative Settings.
• Uncheck the "Control Panel Lock".

If the issue persists, then I would suggest here is to perform network defaults on the printer. 

On the printer control panel - Click on Setup Menu - Tools - scroll down to Restore factory defaults

Click on Yes.

If the issue persists, then the last resort would be to perform an advanced reset on the printer. 

I am sending you a private message with the steps to reset the printer. Please check the mailbox icon at the top-right corner of this screen.

Please check your Private message icon on the upper right corner of your HP Forums profile,

Next, to your profile Name, you should see a little blue envelope, please click on it.

Please reply back on the public post as this Private message box is not monitored.

I hope this helps resolve this issue completely,

Regards,

[Ricodong]

[Ricodong]

This picture that I uploaded,  in embedded web server I can't sign in, bcoz I forgot the admin username & password, what should I do

[Jeet_singh]

@Ricodong,

Greetings and Welcome to the HP Support Community. 

Don't worry, I'm here to help! 

Let's get straight into this - (Please skip the steps if you have already performed).

Network Restore - Press the Wireless button and the Cancel button from the printer control panel at the same time, and then hold them for three seconds.

If the router has a WPS push button, try these steps to connect the printer to the network -

1) Press and hold the Wireless button on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking.

2) Press the WPS button on your router.

NOTE: THE MOMENT YOU PRESS THE WIRELESS BUTTON ON YOUR PRINTER, WITHIN 30 SECONDS YOU SHOULD PRESS THE WPS BUTTON ON THE ROUTER.

If this step is not successful, then we need to first connect the printer to a computer using a USB and then convert the wired connection to wireless as the printer does not have a control panel to enter the Wi-Fi password. 

Please refer to this link for steps.

You may also try setting up the printer using your mobile device -

How To Set Up a Wireless HP Printer from Android?

How to Set Up a Wireless HP Printer from an iPad or iPhone?

Let me know how that goes.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day ahead 🙂

[Ricodong]