Printer in Error State

[MarcoSantiago]

I have an Envy 5020 Printer having previously used Epson with no problems.

No matter what I try I am unable to print anything. I get for the most part now that the Printer is in an Error State. I have had other messages in the past but I dont recall what they were but they related to the Printer being unavailable or not ready etc.

I am in desperate need of printing documents for work and cant afford another printer.

I've tried uninstalling and reinstalling as well as downloading new Drivers and running diagnostics etc. Nothing works.

Regards

[praveen196]

@MarcoSantiago Welcome to HP Community!

I understand that you are unable to print.

Please perform the hard reset and check.

1. Turn the printer on, if it is not already on. 

2. Wait until the printer is idle and silent before you continue. 

3. With the printer turned on, disconnect the power cord from the rear of the printer. 

4. Unplug the power cord from the wall outlet. 

5. Wait at least 60 seconds. 

6. Plug the power cord back into the wall outlet. 

7. Reconnect the power cord to the rear of the printer. 

8. Turn on the printer, if it does not automatically turn on. 

9. Wait until the printer is idle and silent before you proceed 

Please update the firmware.

Keep us posted,

If you would like to thank us for our efforts to help you, 

Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post, 

Have a great day!