Purchased new HP DeskJet 2652 and unable to even set up. I keep getting E8 and all lights blinking.

[sdotz]

I went out and purchased a HP DeskJet 2652 all in one printer today for myself and mother. I was able to set up hers just fine. When I got home to set mine up, I got automatic E8 errors and blinking orange lights. I wasn't even able to start set up. I've tired unplugging, hard reset, and check cartridges, Everything looks good. Please help me figure out how to fix this error as I am trying to and would like to use this as a wireless device. 

[Raj1788]

@sdotz

I suggest you do a Hard Reset on the printer

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

Refer to this document: https://support.hp.com/in-en/product/hp-deskjet-2600-all-in-one-printer-series/12319824/model/157879... for Blinking Lights.

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thank you for joining the HP Community.

Have a great day!

Cheers:)