hp ink tank wireless 415

[pgvenkat]

Hi Team,

pl help me to set up hp ink tank 415 wireless printer.

would like to remove existing setup and update new wifi password.

regards

Venkat

[Kumar0307]

@pgvenkat, Welcome to the HP Support Community!

Restore network settings to default settings

● Press the Wireless button and the Cancel button from the printer control panel at the same time, and then hold them for three seconds.

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button  for at least 3 seconds or until the wireless light starts to flash.

   On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

4. NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

For more info, refer to this document.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!