cancel
Showing results for 
Search instead for 
Did you mean: 
kjheaton
New member
2 1 0 0
Message 1 of 3
147
Flag Post

Solved!

touchpad on envy 7640 is nopt working

HP Recommended
Envy 7640
macOS 10.14 Mojave

The touchpad on the front of the 7640 is not responding to my fingertip. Any suggestions?

1 ACCEPTED SOLUTION

Accepted Solutions
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,554
Message 2 of 3
Flag Post
HP Recommended

@kjheaton, Welcome to HP Support Community!

 

Follow the steps below to isolate and resolve the issue-

 

Reset the printer

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

Try accessing the screen.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

View solution in original post

2 REPLIES 2
TEJ1602
HP Support Agent
HP Support Agent
18,899 18,877 1,559 1,554
Message 2 of 3
Flag Post
HP Recommended

@kjheaton, Welcome to HP Support Community!

 

Follow the steps below to isolate and resolve the issue-

 

Reset the printer

  1. Turn the printer on, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Unplug the power cord from the wall outlet.
  5. Wait at least 60 seconds.
  6. Plug the power cord back into the wall outlet.
  7. Reconnect the power cord to the rear of the printer.
  8. Turn on the printer, if it does not automatically turn on.
  9. Wait until the printer is idle and silent before you proceed.

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

 

Try accessing the screen.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

TEJ1602
I am an HP Employee

View solution in original post

kjheaton
Author
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

The list of steps you provided has fixed the problem. The Envy 7640 touchpad is responding normally. Thanks very much, your solution worked!! Pass it on!

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation