Default administrator password for BIOS

[Rangerova1]

It is a HP Envy m6-n010dx if that helps. Thank you for being patient.

[DavidPK]

Hi,

Try removing the rtc cell then hold down the power button for 60 seconds before re-inserting the rtc  - see Page 36 of your Maintenance & Service Guide.

Regards,

DP-K

[Rangerova1]

That did the trick. Thank you is warranted. Thanks for the follow through.

[DavidPK]

@Rangerova1

You're welcome and good to hear it's Ok

All the best,

DP-K

[SebasBici]

Hello I have the same error: 

My System: 

Model 15-da0046nr  /   ProdID: 3VN48UA#ABA  /  sn: [edited]

BIOS CODE:

System Disabled
85216576

Thanks in advance! 

[kevin-t]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you