• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Do you need help resolving ACPI Errors ACPI\VEN_BOOT&DEV_0000 and ACPI\VEN_PRP&DEV_0001 on HP Chromebook G2? Click here for the troubleshooting steps.
HP Recommended
model 14
Microsoft Windows 8.1 (64-bit)

. I have the System Disabled code and need the unlock code. Thank you very much. [ i 70724617 ]

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@MrG4

 

For that halt, reboot and enter  47794140

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

View solution in original post

9 REPLIES 9
HP Recommended

@MrG4

 

Reboot and enter  47579058

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Invalid password 😥

HP Recommended

@MrG4

 

In that case, I would guess that the prefix to the halt code is actually 'I' not 'i' - if that's correct then:

 

Enter  65682239

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Same message ... Code in that bracket 

 

i  70101705

HP Recommended

@MrG4

 

For that halt, reboot and enter  47794140

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Selected boot image did not authenticate  press enter 

HP Recommended

@MrG4

 

Did the code I posted bypass the system disabled screen?

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Yes Sir thanks alot now its showing black screen with a blue  bar withi this wording, selected boot did not authenticate, press enter

HP Recommended

@MrG4

 

Good to hear :generic:

 

Regarding the subsequent issue, first shutdown the notebook. 

 

Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive.

 

Post back with the results, including any error codes that may be generated.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.