Showing results for 
Search instead for 
Did you mean: 
New member
1 0 0 0
Message 1 of 2
Flag Post

black screen after HP logo splash screen when running on on battery

HP Recommended
HP Pavilion x360 - 11m-ad113dx
Microsoft Windows 10 (64-bit)

Laptop stay on a blank screen after HP Splash screen when running on battery, but when the charger is connected laptop boot normally, can't be a battery issue because also I bought a new genuine HP battery but the problem still present, I'm running latest bios version 

F.27 Rev.A 14.6 MB Jul 1, 2020


Tried also to to a manual BIOS drivers recovery using WIN key + B, after recovery BIOS or using USB to recover BIOS problem still present.


Problem; HP Pavilion x360 - 11m-ad113dx goes blank after HP splash logo ONLY when running on battery power, boots normally when charger is connected, windows 10 2004 install with no problem (ONLY when the charger is connected), as soon as you disconnect the charger when on Windows desktop the computer goes blank (it doesn't shut down, stay on a blank screen) try to connect to external monitor, but no response, you can still hear the HDD spinning but the computer is NON responsive ONLY WHEN THE CHARGER IS DISONNECTED.

Please Help!

Level 16
Level 16
33,549 33,448 3,044 7,497
Message 2 of 2
Flag Post
HP Recommended


Actually it MIGHT be the battery -- as I recently had to purchase a new battery for my own laptop and it would not boot from it.  When I connected the charger and used the info below to check the new battery, it was under 10% charged -- not enough to power up the laptop.


You can check the battery to some extent using Powershell built into Windows 10. as follows:
1) Press Windows key + X
2) Click Powershell in the menu
3) Type powercfg /batteryreport

This will generate a report and if you scroll down, you will see Design Capacity and Full Charge Capacity ratings. If the Full Charge Capacity is less than 50% of the Design Capacity, it is faulty and needs to be replaced.

Also note the figure alongside the "Cycle Count". This tells how many times the battery has been fully recharged. A typical battery can handle around 500 charge cycles, but some will fail sooner than that.

***If my post helped, click the thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation