-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationWindows update impacting certain printer icons and names. Microsoft is working on a solution.
Click here to learn moreInformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Notebooks
- Notebook Boot and Lockup
- ssd not shown
Create an account on the HP Community to personalize your profile and ask a question
10-14-2017 09:14 PM - edited 10-14-2017 09:16 PM
hi all my bios doesnt shows my ssd but before when i clone it n install it. it was showing,so i made my ssd primary boot n i delete my hdd files n it was still boot from ssd but i had problems with the driver then i delete all the files from ssd by going on disk management then i had problem with boot then i freshly install win os on my hdd n while i install it ,it shows both disk but now when i go to bios it doesnt show,so i was wondering how do i install an os in the sssd n make it primary drive.
Solved! Go to Solution.
Accepted Solutions
10-16-2017 10:55 AM
Greetings @mrnepal2012,
Thanks for the post.
I understand you are unable to boot or install OS on your computer after installing an additional SSD, is that right?
Kudos to you for trying to troubleshoot the issue on your own.
Not to worry, I will be glad to assist you.
Have you created a recovery kit for your computer? (Cloning is not recommended)
Have you installed the latest BIOS on your computer?
Please click here for the service guide of your computer.
Refer to page number 5 in the service guide.
Make sure to use PCIe NVMe Three Level Cell (TLC) M.2 solid-state drive (SSD)
Please disconnect the HDD on your computer.
Have only the SSD connected to your computer.
Boot the computer to BIOS by tapping F10 repeatedly on startup.
Restore the BIOS to default settings.
Under security, make sure secure boot is enabled and the legacy boot is disabled.
Save and Exit BIOS.
Shut down your computer.
Connect the recovery kit created on your computer to the USB port.
Turn the computer On and keep tapping F9 repeatedly on startup to enter Boot options.
Select the USB drive and follow the on-screen instructions to complete the installation.
Once the computer is booting and working fine with SSD.
Shut down your computer.
Install the HDD.
Boot the computer to the desktop.
Use the disk management on your computer to format the HDD as a secondary drive.
Refer to this HP Article for assistance in using disk management.
If you do not have a recovery kit created on your computer, please contact our phone support team to order a copy of the recovery kit.
Let me know if this helped.
Disclaimer: HP Doesn't recommend any upgrade/downgrade of any hardware parts or software that is bundled with the product. It may affect the manufacturer's warranty and performance. You can change the configuration at your own risk.
Chimney_83
I am an HP Employee
10-16-2017 10:55 AM
Greetings @mrnepal2012,
Thanks for the post.
I understand you are unable to boot or install OS on your computer after installing an additional SSD, is that right?
Kudos to you for trying to troubleshoot the issue on your own.
Not to worry, I will be glad to assist you.
Have you created a recovery kit for your computer? (Cloning is not recommended)
Have you installed the latest BIOS on your computer?
Please click here for the service guide of your computer.
Refer to page number 5 in the service guide.
Make sure to use PCIe NVMe Three Level Cell (TLC) M.2 solid-state drive (SSD)
Please disconnect the HDD on your computer.
Have only the SSD connected to your computer.
Boot the computer to BIOS by tapping F10 repeatedly on startup.
Restore the BIOS to default settings.
Under security, make sure secure boot is enabled and the legacy boot is disabled.
Save and Exit BIOS.
Shut down your computer.
Connect the recovery kit created on your computer to the USB port.
Turn the computer On and keep tapping F9 repeatedly on startup to enter Boot options.
Select the USB drive and follow the on-screen instructions to complete the installation.
Once the computer is booting and working fine with SSD.
Shut down your computer.
Install the HDD.
Boot the computer to the desktop.
Use the disk management on your computer to format the HDD as a secondary drive.
Refer to this HP Article for assistance in using disk management.
If you do not have a recovery kit created on your computer, please contact our phone support team to order a copy of the recovery kit.
Let me know if this helped.
Disclaimer: HP Doesn't recommend any upgrade/downgrade of any hardware parts or software that is bundled with the product. It may affect the manufacturer's warranty and performance. You can change the configuration at your own risk.
Chimney_83
I am an HP Employee
Didn't find what you were looking for? Ask the community