• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines

Featured blog article:

Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP 250R 15.6 inch G10 Notebook PC (AP3W9AV)
Microsoft Windows 11

Hey, I was wondering if I could upgrade the ram in my laptop, if so how?

I have an HP 250R G10 Intel(R) Core(TM) 3 100U (1.20 GHz) 8/512gb.

 

Thanks for your help

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@balazs4,

 

The service manual (on page 1) states that up to 16 GB (2x8 GB) DDR4-3200 memory is supported.

Maintenance and Service Guide HP 250R 15.6 inch G10 Notebook PC

 

If your model has 2x4 GB memory, you can remove it and install 2x8 GB memory. If you have 1x8 GB, you can add another 8 GB module in an empty second slot.

 

If you need more than 16 GB, open Windows PowerShell as an administrator and run the following command line to see if it's possible.

Get-CimInstance -ClassName Win32_PhysicalMemoryArray | Select-Object MaxCapacityEx, MemoryDevices

 

The max RAM capacity will be reported in KB. To convert to GB, divide the number twice with 1024. If it shows 32 GB, your model likely supports 2x16 GB.

 

The manual shows how to replace/install memory on pages 41-43.

 

 

 

 

View solution in original post

1 REPLY 1
HP Recommended

@balazs4,

 

The service manual (on page 1) states that up to 16 GB (2x8 GB) DDR4-3200 memory is supported.

Maintenance and Service Guide HP 250R 15.6 inch G10 Notebook PC

 

If your model has 2x4 GB memory, you can remove it and install 2x8 GB memory. If you have 1x8 GB, you can add another 8 GB module in an empty second slot.

 

If you need more than 16 GB, open Windows PowerShell as an administrator and run the following command line to see if it's possible.

Get-CimInstance -ClassName Win32_PhysicalMemoryArray | Select-Object MaxCapacityEx, MemoryDevices

 

The max RAM capacity will be reported in KB. To convert to GB, divide the number twice with 1024. If it shows 32 GB, your model likely supports 2x16 GB.

 

The manual shows how to replace/install memory on pages 41-43.

 

 

 

 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.
-->