AHCI drivers for Windows XP professional on Elitebook 2560p

[atztech]

 Hello Paul,

 Zarberg mentioned Mobile Intel QM67 Express Chipset,

so I thought that the "mobile" might work for him, but not for me. Now I installed "mobile" and looks like

it works fine in AHCI mode, no conflicts in hardware.

Thank you very much for your help!

[Paul_Tikkanen]

You're very welcome.

[Lazaro]

Hello.
I'm having trouble installing the AHCI on my pc.
I am using windows 2003 server and do not know which driver to use.
  I've tried several and always gives blue screen.
effect to test installed windows 7 and I enabled AHCI mode in bios, however it does not show.

HP P7-1130BR
Chipset: Intel H67 Chipset

Hardware Ids.

PCI\VEN_8086&DEV_1C08 PCI\VEN_8086&DEV_1C00

I appreciate the attention.
Thanks.

Att
Lazaro.

[Paul_Tikkanen]

Hi:

You need to install the Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

The 32 bit drivers are the second file listed at the link below.

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21408&lang=eng&OSVersion=&DownloadTyp...

Paul

[Lazaro]

Hi Paul.
Ok, I'll do the procedure and post the results later.

Thank you. 

[nemonavicusrino]

hELLO PAUL.

Please escuse my intervention. I have need a litle help. i readet in various post your help on hp units. i have three of this :

hp pro 3500 mt

QB288EA . I try to instal for a client Xp on this machine. (i am a builder and a reseler) but, with  all my efort it just not working.

i have usb fdd, it see, i specifiy drivers, complete the first part of loading drivers on memory but when is on starting windows it simply stay forever on this screen, i tryed your sugestion with version 1006, i tried version 1027 , i tried some version from lenovoit simply did not work, I worked almos a day for this particular machind and nithing, I am realy frustrated now... I have instaled windows 7 with no problem, in fact i type from one of this machin now.

in controler detail i have this

ide/ata/atapi ontrolers

ata chanel 0

ata chanel 4

ata chanel 5

Intel(R) 6 Series/C200 Series Chipset Family 6 Port SATA AHCI Controller - 1C02

i tried boot in ide mode and in ahci mode, none of this option worked for me.

I see on other user xp instaled just fine with some litle help.

Can you give some sugestion, based on your experience ? Maybe some bios settings from factory deny xp instal ?

Acording to cpu z

DMI Baseboard        vendor Foxconn      model 2ABF      revision 3.10      serial unknown    

Northbridge Intel Sandy Bridge rev. 09 Southbridge Intel H61 rev. B3 Memory Type DDR3 Memory Size 4 GBytes Channels Single Memory Frequency 665.3 MHz (1:5) CAS# latency (CL) 9.0 RAS# to CAS# delay (tRCD) 9 RAS# Precharge (tRP) 9 Cycle Time (tRAS) 24 Command Rate (CR) 1T

 Momentarily i have no clue on this on. Please be kind to escuse my poor enghlish, i dont speak fluently, but i hope to understand sufficient.

if you need furter info please write, i will try to respond how quikly as i can.

Thanks in advance for your help.

Sorin.

[Paul_Tikkanen]

Hi, Sorin:

Windows XP should install with the BIOS set to IDE mode without installing any drivers.

Are you using an XP SP2 disk or newer?

Maybe anything older won't work at all.

If you are using an XP SP2 installation disk, how about trying to slipstream the SATA AHCI drivers?

Please read this guide to do that at the link below. Read the Intel section and then follow the instructions on the downloadable document to slipstream all of the drivers.

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/SATA-drivers-for-...

Below is the link to the drivers you need to slipstream.  XP 32 bit is the second file listed.

https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2975&DwnldID=20707&keyword=F6&lang=en...

[nemonavicusrino]

Thanks Paul for your very quik response.

I  am not at work momenarily. These units came with win 7 pro, so it is eligible to xp. I use for instalation original disk from xp sp3 pro OEM edition. Even tryed with home edition sp3 OEM. Booth options , ide or ahci give same results. I have leave overnight at stalled screen with same results. I will try at  night to sleepsttrsm drivers. I will read sugedtions even if i know very well how to use nlite or other software to sleapstream drivers. 

[nemonavicusrino]

Now im came to work to contiune pursuit these problem. I tryed version 1022  (that you sugested  - with usb floppy , not sleepstreamed) and didn't work. Another strange situation observed (sory for not writing on initial post about that) is the fact that when setup came to specify aditionaly drivers, it list only 4 entry, even if in textsetup is specified more. the specified drivers is

ich7R /dh

ich7MDH

intel DESKTOP/workstation, /serverEXPRESS CHIPSET SATA RAID CONTROLLER (it don't list the ahci model, only sata raid)

intel mobile EXPRESS CHIPSET SATA RAID CONTROLLER

I even tryed to load all four drivers listed, but no thing changed 

Another ideea i have tryed just now is to unplug the hard disk an let only cdrom to see if it give me the error of no hard disk founded. Even in this situation same result. Computer stall at "Setup is starting windows. I will try next to setup with diferent hall to see if somthing is wrong with configuration setup of the board." 

I tryed with F7 to disable Acpi. No luck...

[Paul_Tikkanen]

Hi:

Are you using the Up/Down arrow keys on the keyboard to scroll to and find the correct driver.

The screen never shows all of the drivers on the floppy disk. You need to scroll up or down and find the others.