-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Adding RAM and a SATA SSD to my HP Pavilion

Create an account on the HP Community to personalize your profile and ask a question
04-10-2024 09:37 AM
Hello,
I have a 38R99EA Pavilion Gaming 15-dk1023nl laptop and i want to add 8gb of RAM and possibly a SATA SSD to the open slot, but i was wondering compatibility between the RAM sticks that are already in place since factory.
I would appreciate some help for clarity and to understand how i can find compatible pieces.
From what i've understood the PC runs SDRAM DDR4-2933 - 8 GB as 2x4GB, so i sould only buy other sticks that are DDR4 and have 2933 MHz?
While for the SSD what limitations do i have? Only that it has to be SATA?
Thanks,
Lorenzo.
Solved! Go to Solution.
Accepted Solutions
04-10-2024 10:27 AM - edited 04-10-2024 10:28 AM
You're very welcome.
Any compatible DDR4 memory chip should work.
Just make sure that the DDR4-3200 memory chip has a CL22 timing specification.
I'm like 99% sure that since your notebook did not come with a 2.5" SATA drive none of the parts are there.
But the only way to be 100% sure is to remove the bottom cover and have a look.
04-10-2024 10:16 AM - edited 04-10-2024 10:16 AM
Hi, Lorenzo:
Most folks install DDR4-3200 MHz memory and that will automatically bridge to 2933 Mhz.
HP - Compaq Pavilion Gaming 15-dk1023nl | Aggiornamenti Memoria RAM e SSD | Crucial IT
Chapter 1 of the service manual indicates the maximum memory is 2 x 16 GB, but the Crucial memory report is almost always correct.
Adding a 2.5" SATA drive is not as simple as you may think, and it may be easier to replace the 512 GB M.2 NVMe SSD with one having a greater storage capacity.
Most likely none of the parts will be there to install a 2.5" drive so you will have to find and buy the parts listed in chapter 3 of the service manual to install a 2.5" drive and the bracket to secure the drive is not available for purchase.
Hard drive bracket (not available as a spare part)
Hard drive cable L56898-001
04-10-2024 10:27 AM - edited 04-10-2024 10:28 AM
You're very welcome.
Any compatible DDR4 memory chip should work.
Just make sure that the DDR4-3200 memory chip has a CL22 timing specification.
I'm like 99% sure that since your notebook did not come with a 2.5" SATA drive none of the parts are there.
But the only way to be 100% sure is to remove the bottom cover and have a look.