-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
@Anirban_N wrote:Can I install additional RAM and SSD type ROM alongside the stock RAM and ROM? Or do I need to remove the stock RAM and ROM in order to install new ones?
What do you mean ROM. I believe ROM is for Read Only Memory. Normally we won't replace RỌM I think you are talking about Storage (or Hard Drive). The specs of your machine is
https://support.hp.com/au-en/document/c06017372
It has 4 GB DDR4-2400 SDRAM (1 x 4 GB) of RAM and 1 TB 5400 rpm SATA SSHD for storage.
1. RAM: Your machine supports 16GB max. You can upgrade to
(a) 8GB: keep existing 4GB, add 4GB more to slot 2
(b) 12GB: keep existing 4GB, add 8GB more to slot 2
(a) 16GB (max):remove existing 4GB, install 8GB each to both slots.
2. Storage: You can add M.2 SATA/NVMe SSD to your machine
Please use compatible products from the following link
https://www.crucial.com/compatible-upgrade-for/hp---compaq/pavilion-x360-14-cd0077tu
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
HP Recommended
@Anirban_N wrote:Can I install additional RAM and SSD type ROM alongside the stock RAM and ROM? Or do I need to remove the stock RAM and ROM in order to install new ones?
What do you mean ROM. I believe ROM is for Read Only Memory. Normally we won't replace RỌM I think you are talking about Storage (or Hard Drive). The specs of your machine is
https://support.hp.com/au-en/document/c06017372
It has 4 GB DDR4-2400 SDRAM (1 x 4 GB) of RAM and 1 TB 5400 rpm SATA SSHD for storage.
1. RAM: Your machine supports 16GB max. You can upgrade to
(a) 8GB: keep existing 4GB, add 4GB more to slot 2
(b) 12GB: keep existing 4GB, add 8GB more to slot 2
(a) 16GB (max):remove existing 4GB, install 8GB each to both slots.
2. Storage: You can add M.2 SATA/NVMe SSD to your machine
Please use compatible products from the following link
https://www.crucial.com/compatible-upgrade-for/hp---compaq/pavilion-x360-14-cd0077tu
Regards.
BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
2
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community