Base removal trick? Base removal trick? HP Spectre x360 Convertible Laptop - 15t Assembled Apr 2017.

[RJ0NE5]

Base removal trick?

HP Spectre x360 Convertible Laptop - 15t touch

Assembled Apr 2017.

The back (hinge) edge will not release. This laptop has 2 T5 screws along this back edge and 2 foot pads if that helps to identify it.

[Lil_Boy_Blue]

Hi
Make, Model and OS please.
SKU: if possible by this method
WinKey + R and type
msinfo32
Read Line 9
System SKU: N6K07EA#ABU

Please do not post Serial Numbers.

Sometimes there are screws under the rubber pads.

[RJ0NE5]

Make Model: HP Spectre x360 Convertible 15-blOXX

OS:        Microsoft Windows 10 Pro

Version 10.0.14393 Build 14393

System SKU:       X5P15AV

[Lil_Boy_Blue · Accepted solution]

Hi

https://support.hp.com/us-en/product/hp-spectre-15-bl000-x360-convertible-pc/13823372/model/13823373...

http://h10032.www1.hp.com/ctg/Manual/c05357610   Page 22

Before disassembling the computer, follow these steps:
1. Turn oƫ the computer. If you are unsure whether the computer is oƫ or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by ƭrst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
Remove the bottom cover:
1. Close the computer and position it upside down.
2. Pry the two rear feet of the bottom of the computer (1).
3. Remove the two Phillips M2.0×9.0 screws (2) from under the rear feet.
4. Remove the two Torx T8M2.0×3.5 screws (3) and the four Torx T8M2.0×9.0 screws (4) that
secure the bottom cover to the computer.
5. Starting near the hinges, pry the bottom cover (5) oƫ the computer.

[Lil_Boy_Blue]

Prego.