Battery issues

[blablableeeh]

Hi, i started having problems with my laptop battery around 1,5 years ago right after my warranty was finished, it will charge for a few seconds or a couple of miinutes and then just stop charging for a while, then start to charge again etc.

The battery percentage will jump up and down randomly during usage and be very different when i use the laptop again after shutting it down.

If i dont have the adapter plugged in, the battery can go from 60% to 0% within a minute and the laptop will just die and sometimes it will hold for an hour before dying.

i have tried the following things several times in order to try and fix it:

Tried another AC adapter.

Power reset.

Updated BIOS.

Uninstalled and reinstalled drivers.

Tried calibrating the battery.

Did diagnostics from both the F2 menu at startup and also when logged into windows on both hardware diagnostics and hp support.

Nothing is working and i seriously dont know what else to do.

[Echo_Lake]

@blablableeeh

Thank you for posting on the HP Support Community.

• Did this happen after a recent window or software update?
• Did you try another charger?
• Does the notebook shut down immediately (right after you unplug the charger)?
• Do you get any error message on your notebook (Such as Plugged in, not charging, etc.)?

To get the answer to this question, the average laptop battery is good for around 400 recharges cycles. After that, it starts to lose its capacity to hold a charge. This is about one and a half to two years of battery life for the average user.

While you respond to that, let's try these steps: 

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

BIOS default: 

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer. If the issue persists, follow the next steps.

Run hardware diagnostics test on battery and Charger:

Use the following steps to open the Component Tests menu.

1. Hold the power button for at least five seconds to turn off the computer.
2. Turn on the computer and immediately press Esc repeatedly, about once every second. When the menu appears, press the F2 key.
3. On the main menu, click Component Tests.
4. The Component Tests menu displays. Your Component Tests menu might be different, depending on the components installed on your computer.
5. To run both tests simultaneously, in the Component Tests menu, click Power Source, and then click Run once. Each component can also be tested individually.

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

[blablableeeh]

• Did this happen after a recent window or software update?

no

• Did you try another charger?

yes

• Does the notebook shut down immediately (right after you unplug the charger)?

very rarely but it happens from time to time even when it says it has more than 40% battery

• Do you get any error message on your notebook (Such as Plugged in, not charging, etc.)?

no but sometimes the charging bar stops moving when plugged in, but there is no text or error saying not charging, it only says how much until fully charged

To get the answer to this question, the average laptop battery is good for around 400 recharges cycles. After that, it starts to lose its capacity to hold a charge. This is about one and a half to two years of battery life for the average user.

When it started getting worse it was just from one day to another

While you respond to that, let's try these steps: 

Hard Reset: Follow steps from the link: https://hp.care/2GnkMa8. (do not skip any troubleshooting steps even if you feel steps are repeating)

already tried this before

BIOS default: 

1. Turn off the computer and wait five seconds.
2. Press the Power button to start the computer and repeatedly press the F10 key to enter the BIOS setup menu.
3. On the BIOS Setup screen, press F9 to select and load the BIOS Setup Default settings.
4. Press F10 to Save and Exit.
5. Use the arrow keys to select Yes, then press Enter when asked Exit Saving Changes?
6. Follow the prompts to restart your computer. If the issue persists, follow the next steps.

No difference

AC Adapter Test:

The AC Adapter test provides an interactive test to determine if the AC power adapter is functioning properly. A good battery is required for this test. Before running the AC Adapter Test, HP recommends verifying that your computer can receive power by connecting a known working AC adapter.

Follow these steps to perform the AC Adapter Test.

• In the Component Tests menu, click Power, and then click an AC Adapter Test.
• Click Run once.
• The AC Adapter Test begins.
• When the test is complete, the results are displayed on the screen.

This test loaded for less than a second and did not show any results exept that the test was finished..

Battery Test:

Follow these steps to perform the Battery Test:

1. In the Component Tests menu, click Power, and then click Battery.
2. Click Run once. The Battery Test begins.
3. When the battery test is complete, the results are displayed on the screen. For additional battery information, click Battery Details.

It says the primary battery is OK and has a 84% capacity

If the test passes, continue with these steps:

1. Go to Start, search for Device Manager, and open this result.

2. Expand batteries.

3. Right-click on the ACPI option (usually the 2nd option) and select delete or uninstall. Follow the prompts.

4. Shut down the computer. 

5. Disconnect the charger.

6. Remove the battery.

7. Hold down the power button for 1 minute.

8. Insert the battery only.

9. Attempt to turn the battery on.

I have already tried this before without success

[Echo_Lake]

@blablableeeh

Thank you for posting back. 

This sounds like hardware related issue with the battery. Hence, I would request you to contact our Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link:  www.hp.com/contacthp/

Please feel free to contact us here anytime you need any further assistance. Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.