Calling upon NonSequitur777

[northwoozy]

I was wondering, I was looking at the motherboard of the ProDesk600 G3 MT, looking for the NVME slot, since you have the best knowledge on this computer, I felt like you would know. I mean, I actually already know its next to the wlan slot, but I dont know how to get my ssd to work.

[M_Salman]

Hi @northwoozy 

I'd love to help you out by doing two things. 

1) Let me tag @NonSequitur777 for you. 

2) I'll try to answer this question to the best of my knowledge:

Kindly refer to Chapter 4, Removal and Replacement Procedures, of the maintenance and service guide of your device:

http://h10032.www1.hp.com/ctg/Manual/c05382329.pdf

And Page #11 on the system board connectors to understand exactly where the SSD NVMe slot is located:

http://h10032.www1.hp.com/ctg/Manual/c05388266.pdf (Hardware reference guide)

That said, if you've been able to connect it and yet it isn't getting detected, I'll need more details to help you better:

• Did you check if it's detected in BIOS?
• Did you try this SSD on a different device to confirm it's working?
• And Did you ensure it's compatible? To check its compatibility, see the tested list of components on page #7 of the computer major components in the maintenance guide mentioned above.

Take care and have an amazing day!

If you would like to thank us for our efforts to help you, go to the public post and give us a virtual high-five by clicking on "Yes" for the question "Was this reply helpful?" below my message, followed by clicking on the "Accept as solution" on my public post.

Regards,

Salman