Create an account on the HP Community to personalize your profile and ask a question
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
01-21-2017 01:01 PM
Product: HP ENVY dv7 Notebook
Operating System: Microsoft Windows 10 (64-bit)
I have a HP ENVY dv7 Notebook PC, Product number: C2Y66AV and installed a SSD drive and installed my OS. I ordered the kit so I could install a 2nd HD that I could use for another drive.
Everything is fine and the computer boots just fine until I hookup the 2nd hard drive. When I do, I get the following screen:
When I hit the esc key I get the following screen:
I select the f9 key to boot select the "Boot Device Options"
Then I get the following screen:
I have to select the 2nd "OS Boot Manager" in order for the computer to boot because if I select the 1st one it takes me back to the screen of the 1st image I posted about needing to do a recovery.
I did go in to my bio because I thought I could just change the boot order but I am having a hard time understanding the bio's because its not very clear on what I need to do in order to fix this. Here is what the bio's says under boot options:
Can anyone help me on what I need to do for the computer to boot.
Thanks so much for your help!
Solved! Go to Solution.
1 ACCEPTED SOLUTION
10 REPLIES 10
01-21-2017 02:39 PM
No just saying if you did have the mSATA mSSD (small hard drive not like your 2.5 inch SSD) it needs to be removed if you want to use a primary SSD drive. Where did you get the second hard drive caddy and cable? If adding the second hard drive causes issues we maybe need to focus on the cable.
01-21-2017 02:54 PM
When I installed the ssd, I took out the Harddrive and used the same cable and spot where the harddrive use to be and then I used the kit to install the old harddrive in the 2nd harddrive spot.
here is where I go the kit. It's the same part # as HP said I needed:
01-21-2017 03:03 PM
Well it is knockoff not a genuine HP part so it might be defective. In fact that would be the most likely scenario. Genuine HP Parts can be defective, too but it seems to happen more often with aftermarket clones.
Look at the reviews. Others have received a defective cable and one user says you have to update the BIOS or it will not work. Did you try that?
01-21-2017 03:20 PM
Ya, I have the latest bios installed. When I manually boot the computer, it will boot from the ssd and when I get in to windows 10.. I can see the 2nd hardrive and I have already install software on the 2nd drive. I am just using the ssd to boot from and to run some other misc. Software but as I said the cable I am using on the ssd is the same cable that came with the laptop. Everything works great as long as I manually boot it.
01-22-2017 08:54 AM
Learn easy way how to fix repair Windows 7/8/8.1/10 NOT booting to start up screen Recovery error code "0xc000000f" aka blue screen of death 2016 solved, works for Acer, VAIO, DELL, HP, Lenovo, Toshiba, Alienware and more Steps 1. reset PC 2. use USB recovery drive 3. tap f12 at boot to access HDD
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community