• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended

Hi,

 

Did you enter the code using a QWERTY keyboard?

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Yes of course

HP Recommended

Hi,

 

Try a Hard Reset as follows.

 

Shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Plug in the AC Adapter ( leave the battery out for the moment ), start the notebook and try entering the code again.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Merci merci merci 10000 merci mais maintenant je dois supprimer le mot de passe de bios parceque a chaque redemarrage demande le mot de passe encore mille merci que dieu vous protege

HP Recommended

Hi,

 

You're welcome :generic:

 

You can remove the need for a power on password as follows - use the code from my previous post where necessary.

 

Shut down the notebook.  Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu.  Use the arrow keys to highlight the Security tab and hit enter.  Use the arrow keys again to highlight power on password and hit enter.  Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field.  Press f10, select to save the new settings and hit enter.

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Bonjour le probleme est reglé merci

HP Recommended

You're welcome - good to hear it's Ok :generic:

 

All the best,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Hw can I solve compaq mini 110

fatal error system halted...CNU9333390

HP Recommended

Hi,

 

Enter:      e9loffffo1      ( 3rd character is a lower case L )

 

Regards,

 

DP-K

---------------------------------------------------------------------------

****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****


Windows Insider MVP

HP Recommended

Many thanks for all your help on this.  It was very much appreciated and apologies if you did not receive my earlier Kudos / thanks

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.