-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Compatible battery and charging

Create an account on the HP Community to personalize your profile and ask a question
04-13-2019 12:59 PM
Hello, I have bought a compatible battery for my laptop recently and I would like to know if the charging directions for the first time use make sense.The compatible battery is a Li-Ion.
Isn't lithium batteries with no memory effect?Given that, isn't only needed to charge and discharge it normally(when remaining power is nearly 10-20%) and avoid recharging it till exhausting battery power, because it will bring too much damage?
Directions
Solved! Go to Solution.
04-13-2019 01:20 PM - edited 04-13-2019 01:23 PM
Who told you to do this? No you want to try to avoid, if possible discharging below about 15-20%. Li-ion does have no memory effect. Ni-Mh batteries have not been around since about 1996 and Ni-Cad even longer than that. They were the kind with memory effect but its amazing how much "urban myth" is still out there based on problems with Ni-Cad in particular that have not been an issue in nearly 30 years.
So charge it up all the way up and then begin using it i.e. you can then unplug and go. When there is an electrical outlet use it. When you have to, run it on battery. That's all you really need to do. You do not need to do 3-4 full cycles right off the bat.
Post back with any more questions.
04-14-2019 10:47 AM - edited 04-14-2019 10:49 AM
At first, thank you for your answer.
Well, my previous battery was a compatible one as well(10.8V 4400mAh while the new one is 10.8 5200mAh).
The package of my previous battery included a piece of paper written by the seller(local one) with the above-mentioned directions in my initial post.In battery's manual it was written: ''Discharge the battery to 2% and then charge fully to 100% for the first cycle.''
My new compatible battery doesn't include any info about charging so I was wondering if the directions of my previous one should apply.I asked the ownwer of the store I bought it(different store) and anwered me that I should just charge it fully at first,discharge it to 10% and follow the rule of 10%-80% for charging.
04-14-2019 02:48 PM
The last advice is not too bad. The 80% rule keeps the battery chip from chalking up a "cycle" so theoretically it will last longer. I don't see the need for that and charge mine to 100%. I also try not to let it go below 15-20% but you can get by with dropping to 10%. If you routinely let it drop to below 10% you will damage the battery that is true.