• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP 250 G6
Microsoft Windows 10 (64-bit)

I can't find the ddrivers for windows 10

 

1.PCI Data Acquisition and Signal Processing Controller

PCI\VEN_8086&DEV_9D31&SUBSYS_832A103C&REV_21

 

2.Base System Device

PCI\VEN_8086&DEV_1911&SUBSYS_832A103C&REV_00

 

Thanks for your help.

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Hi:

 

See if installing the latest chipset installation utility directly from Intel installs those devices. 

 

Download, unzip and run the setup application.

 

https://downloadcenter.intel.com/download/28182/Chipset-INF-Utility?product=1145

View solution in original post

5 REPLIES 5
HP Recommended

Hi:

 

See if installing the latest chipset installation utility directly from Intel installs those devices. 

 

Download, unzip and run the setup application.

 

https://downloadcenter.intel.com/download/28182/Chipset-INF-Utility?product=1145

HP Recommended

Thanks,  it's ok but i forget one driver  :

( in french) Controleur pci de communications simplifiées :
PCI\VEN_8086&DEV_9D3A&SUBSYS_832A103C&REV_21

 

and your solution dont find it. Have you a solution for this driver.

HP Recommended

You're very welcome.

 

You need this driver for that device...I zipped it up and attached it below. 

 

You will need to manually install the driver as follows....

 

Go to the device manager, and click on the Controleur pci de communications simplifiées.

 

Click on the driver tab.  Click on Update driver.

 

Select the Browse my computer for driver software option, and browse to the driver folder you unzipped.

 

Make sure the Include Subfolders box is checked, and the driver should install.

 

Then restart the PC.

 

Here is a partial copy and paste of the driver setup information file, which shows driver support for the hardware ID you posted.

 

[Intel.ntamd64.10.0]
; DisplayName Section DeviceId
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_8C3A ;ME9.1 - HSW/LPT-H
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_9C3A ;ME9.5 - HSW/LPT-LP
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_8D3A ;ME9.1 - HSW/WBG
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_9CBA ;ME10.x - BDW/WPT-LP
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_8CBA ;ME9.1 - BDW/LPT-H
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_9D3A ;ME11.x - SKL/SPT-LP, KBL/SPT-LP
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_A13A ;ME11.0 - SKL/SPT-H
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_A2BA ;ME11.6 - KBL/KBP-S
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_A1BA ;ME11.x - Purley WS SKL/LBG - Production
%TEE_DeviceDesc%=TEE_DDI_W10_x64, PCI\VEN_8086&DEV_A23A ;ME11.x - Purley WS SKL/LBG - PreProduction

 

 

HP Recommended

Thanks for your answer, but i have test before and I can't find the driver in the folder .

 

But i find at last the driver :

https://downloadcenter.intel.com/fr/download/28083/Moteur-de-gestion-Intel-Pilote-pour-Windows-7-8-1...

HP Recommended

You're very welcome.

 

Glad you found the driver you needed.

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.