-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: HDD/SDD connectors

Create an account on the HP Community to personalize your profile and ask a question
02-04-2019 11:14 AM
I'm moving an SSD from a dead Pavilion M7-1015dx laptop to become the boot drive in a new 17-by0021dx laptop. Before I open up the latter, does it already have an unused cable running to the second drive bay, OR is the connector at the laptop end the same so that I can use a cable from the old Pavilion (its connector below).
Solved! Go to Solution.
Accepted Solutions
02-04-2019 07:36 PM
Your notebook spec. HP 17 Laptop PC - Maintenance and Service Guide
If you notebook comes in single m.2 drive configuration, then it will not have sata cable in 2.5" drive bay. You will need L22526-001cable and perhaps L22534-001cover (page 23). You can find these on eBay.
You can compare the above cable to that pulled from M7-1015dx (Kit PN# 681976-001)
02-04-2019 07:36 PM
Your notebook spec. HP 17 Laptop PC - Maintenance and Service Guide
If you notebook comes in single m.2 drive configuration, then it will not have sata cable in 2.5" drive bay. You will need L22526-001cable and perhaps L22534-001cover (page 23). You can find these on eBay.
You can compare the above cable to that pulled from M7-1015dx (Kit PN# 681976-001)