• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
Locked

‎09-05-2018 10:21 AM

HP Recommended
Product: HP OMEN 15-dc0051nr
Operating System: Microsoft Windows 10 (64-bit)

1. display panel connector 30pin or 40pin ?

 

2. Support Thunderbolt 3(EGPU)?

 

 

1 person had the same question
1 ACCEPTED SOLUTION

Accepted Solutions

‎09-05-2018 11:24 AM

HP Recommended

Hi,

 

Yes, I believe you can, you would need to replace the cable from motherboard to screen and screen. You say the cable is FHD 144 Hz/UHD  40 pin  which is for two different screens one is FHD 144Hz and the other is UHD 60Hz.

 

It is going to be quite expensive.

 

Regards,

David

View solution in original post

Was this reply helpful? Yes No
3 REPLIES 3

‎09-05-2018 10:34 AM

HP Recommended

Hi,

 

1. The display connector is a 30 pin connector. Your display is the 

 

part number L24374-001LCD RAW PANEL 15.6'INCH FHD 60Hz NB

and the display cable for this screen is FHD 60 Hz, 30 pin      part number L24382-001

 

page 27-28 of service manual:

 

http://h10032.www1.hp.com/ctg/Manual/c06034959

 

2. Yes it will support an eGPU as it has a Thunderbolt 3 port.

 

spec page:

 

https://support.hp.com/us-en/product/omen-by-hp-15-dc0000-laptop-pc/20329817/model/21008845/document...

 

Hope it helps,

David

 

Please click on thumbs up for thanks

Please click on accept as solution if answered your question

Was this reply helpful? Yes No

‎09-05-2018 11:14 AM - edited ‎09-05-2018 11:16 AM

HP Recommended

 Thanks for the answer.

 

Can I upgrade from FHD 60 Hz 30 pin to FHD 144 Hz/UHD  40 pin?

Was this reply helpful? Yes No

‎09-05-2018 11:24 AM

HP Recommended

Hi,

 

Yes, I believe you can, you would need to replace the cable from motherboard to screen and screen. You say the cable is FHD 144 Hz/UHD  40 pin  which is for two different screens one is FHD 144Hz and the other is UHD 60Hz.

 

It is going to be quite expensive.

 

Regards,

David

Was this reply helpful? Yes No
Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
Didn't find what you were looking for? Ask the community
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.