HP Probook 4440s 16GB RAM upgrade?

[FSHenrique]

Well, the memories arrived and to my surprise, they worked perfectly.

There were 2 upgrades:
- First memories, kit 16Gb Corsair Vengeance (2x 8Gb) CAS 9 1600Mhz, model CMSX16GX3M2B1600C9;
- Intel Core i7-3632qm processor.

Everything went well and without incident. It was only necessary to adjust the Windows boot parameters.

The setting is as follows:

1) Install the 16GB of RAM

2) Allow to boot and login

3) Press the Windows key

4) Enter msconfig in the search window and press enter

5) Once it loads navigate to the System Configuration window (ALt-Tab).  You may have to use the keyboard since the mouse pointer does not appear on the screen.  At least it didn't in my case.

6) Navigate to the Boot tab (Ctrl-Tab)

7) Navigate to the Advanced options tab (Tab), press enter and the Boot Advanced Options window will open

😎 Navigate to the Maximum memory: check box (Tab) and press the space bar to check it

9) Navigate to the Memory window and enter 16384

10) Navigate to the Ok button (Tab) and press enter

11) Navigate to the Ok button (Tab), press enter and the System Configuration window will open

12) Navigate to the Restart button (Tab) and press enter

13) Wait for the computer to restart and when it does you will once again have normal functionality.

Without this change Windows runs slowly.

The processor changeover was completely transparent. Windows just installed the drivers for the new processor and requested the reboot. Happy ending.

Do not forget the basics, always enter the BIOS to check the changes and SAVE before leaving.

For this reason I ask why not accept, since the chipset is compatible and there are no physical reasons why it does not work. It could happen that you do not accept the logical assembly configuration of the memory components in the comb, but this should already be anticipated by HP at the time.

Check pictures...

First BIOS...

Windows config screen...

Now, with Core i7-3632qm...

[HewP4sam]

I used to slots , one an 8 GB and the other a 4GB. Both work fine.

[ShailendraKadre]

You can upgrade Hp Probook 4440s to 16gb Ram

I have upgraded my Hp Probook 4440s to 16gb Ram using Crucial 2x8gb ram kit for Hp probook 4440s

Link : https://www.crucial.com/usa/en/compatible-upgrade-for/HP-Compaq/probook-4440s

But you will need to upgrade to Windows 10.

I have done this upgrade on my laptop running win10 and it worked perfectly.