-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- HP Spectre X360 Bottom is bulging

Create an account on the HP Community to personalize your profile and ask a question
12-03-2020 09:37 PM
Hi there,
The bottom of my HP Spectre X360 laptop is swelled up. I'm not sure why, probably from over-heating. My warranty is expired but I still want to fix this problem. Where and how can I fix this body deformation problem. Any help is appreciated.
Thanks
12-06-2020 12:05 PM
Hi@ArafatKabir, Welcome to the HP Support Community!
I have a few steps to resolve this issue:
Symptoms of heat issues and causes of excessive heat
The following list describes some of the issues caused by overheating in the notebook:
-
Games stop responding during play.
-
Windows stops responding during use.
-
Fans inside the notebook become louder because they are spinning faster as the laptop gets hot, to remove the heat.
-
When starting the laptop, it sometimes stops at a black screen and does not open into Windows. Windows usually stop responding when it does open.
The following list describes some causes of excessive heat:
-
Dust inside the laptop.
-
A new component, such as a hard drive, is added. The extra component causes the power supply to work harder and generate more heat. Extra heat also radiates off the new component and adds to the temperature inside the case.
-
Over time, some cooling fans might slow down and wear out, as the laptop is getting hot, depending on the usage of the laptop.
-
High ambient room temperature.
Step 1: Removing dust and lint by cleaning vents
Step 2: Ensuring proper space for ventilation
Step 3: Updating the BIOS
Step 4: Using HP CoolSense technology
Step 5: Placing the notebook in a cooler room
Step 6: Testing for hardware failure
If the hardware has failed, capture the failure ID and revert for further assistance.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
12-08-2020 06:49 AM
Hi @ArafatKabir, Welcome to the HP Support Community.
Please download the fully loaded battery validation utility HP Notebook Computer Battery Safety Recall and Replacement Program
As this is a hardware issue, I'd suggest you Contact HP in your region regarding the service options for your computer.
If you are having trouble navigating through the above options, it's most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile name, you should see a little blue envelope, please click on it.
Have a great day!
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!