• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Troubleshooting screen flickering issue on HP notebooks: Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP Spectre x360 16 inch 2-in-1 Laptop PC 16-f2000 (74R52AV)
Microsoft Windows 11

I have a new HP Spectre x360 16. The stylus pen has been on charge for more than 3 hours, both the charger that came with the pen and my usual phone charger. However, it remains orange and won't turn white to show it is fully charged. Also, it seems to not react at all when i press buttons and its off the charger, i.e. I have not managed to pair it with the laptop. WHat can I do?

1 REPLY 1
HP Recommended

@Tchivan, Welcome to the HP Support Community!  

  

Thanks for reaching out about your query regarding HP Spectre x360 Stylus Pen Charging Issues! 

We're thrilled to have the opportunity to assist you and provide a solution.  

  

Since your Spectre pen is new and should normally show a white light when fully charged, staying orange for hours suggests it isn’t actually charging or isn’t responding properly. Let’s try a few checks to wake it up:

 

🔧 Troubleshooting Steps

Clean the connectors

Gently wipe the charging pins on the pen and inside the charging cradle (or USB-C port if it’s that model) with a dry, lint-free cloth. Dust or film can stop proper charging.

 

Try a direct wall charger

Plug the pen into a wall outlet using the HP-provided adapter/cable, not a USB hub or laptop port. Some third-party chargers don’t supply steady power.

 

Check the LED behavior

Normally, orange = charging, white = fully charged.

If it stays orange forever, the pen may not be completing the charging cycle.

 

Force reset the pen

Hold both pen buttons together for about 10–15 seconds. This can sometimes reset its internal controller

.

Pairing with your Spectre

Go to Windows Settings → Bluetooth & devices → Add device → Bluetooth.

Press and hold the top button (eraser end) of the pen for 3–5 seconds until the LED blinks, then try pairing.  

 

Hope this helps! 

Take care, and have an amazing day!  

  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

  

Regards, 

ZOEY7886
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.