Hardware info of built-in SSD M.2 128GB SAMSUNG MZNLN128 (Notebook HP 15-db0320ng)

[Goodnight]

The kernel startup process of Linux Mint 19.1 takes 35 seconds to finish on my new HP 15-db0320ng. Very poor result for a SSD.

Is there any information about the sequential reads in MB/s or the interface (SATA I/II/III)? I consider buying a new SSD.

Best regards

[iomare]

Hi,

The M2 drive in there at the moment is a SATA3 drive. You could insert a much faster M2 PCIe NVMe drives such as the Samsung 970 Evo Plus or similar. (There is no limit to capacity)

Example:

https://www.amazon.com/Samsung-970-EVO-Plus-MZ-V7S1T0B/dp/B07MG119KG/ref=sr_1_1?keywords=970%2Bevo%2...

On page 47 of the service manual, you can see the steps to replace the drive

http://h10032.www1.hp.com/ctg/Manual/c06245081

Hope it helps,

David

Please click on thumbs up for thanks

Please click on accept as solution if answered your question