• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Are you having HotKey issues? Click here for tips and tricks.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
Hp folio 13-1016TU
Microsoft Windows 7 (32-bit)

Hi, I'm getting blue screen on start-up asking for "Enter Administrator Password or Power On Password" After 3 failed attempts there is a system disabled code 75611746

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

Please try this Password :  

60779388

 

 

Steps to be followed:

  1. Use the unlock code posted above to enter the BIOS
  2. Disable all passwords that are enabled
  3. If asked for current password - type the unlock code
  4. For new password, just press ENTER key
  5. Repeat the same for verify password column.
  6. Then leave the BIOS by saving & exit option to save the changes.

 

 

Hope this helps, for any further queries reply to the post and feel free to join us again !!

 

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

 

Thank You,

GBL84

I am not an HP Employee 

View solution in original post

1 REPLY 1
HP Recommended

Please try this Password :  

60779388

 

 

Steps to be followed:

  1. Use the unlock code posted above to enter the BIOS
  2. Disable all passwords that are enabled
  3. If asked for current password - type the unlock code
  4. For new password, just press ENTER key
  5. Repeat the same for verify password column.
  6. Then leave the BIOS by saving & exit option to save the changes.

 

 

Hope this helps, for any further queries reply to the post and feel free to join us again !!

 

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

 

Thank You,

GBL84

I am not an HP Employee 

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.