cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
3 2 0 0
Message 1 of 6
670
Flag Post

Solved!

How to connect 3 external full HD displays on HP Probook 470 G5 with HP USB-C Dock G4 (3FF69AA)

HP Recommended
HP Probook 470 G5
Microsoft Windows 10 (64-bit)

How to connect 3 external full HD displays on HP Probook 470 G5 with HP USB-C Dock G4 (3FF69AA)? I found on specification that this dock supports only two displays with FHD resolution. Is it possible to connect third FHD display through HDMI on my HP Probook 470 G5?

All displays have resolution 1920x1080, DVI connectors (so I must use adapters) and I don't need to use notebook screen in such configuration.

5 REPLIES 5
Level 19
Level 19
84,788 84,675 10,705 22,956
Message 2 of 6
Flag Post
HP Recommended

@Mikac 

 

The following may answer your question

 

   https://plugable.com/products/ud-ultcdl/

 

or try

 

    https://www.displaylink.com/products/universal-docking-stations

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

0 Kudos
Highlighted
Author
New member
3 2 0 0
Message 3 of 6
Flag Post
HP Recommended

Thank you for your quick answer.

After your answer I have decided to buy Dell Universal Dock D6000.

This dock have DisplayLink and have support for my three FHD screens (from specs can run up to three 4K monitors). For output it have 2x DisplayPort and 1x HDMI port.

I have installed DisplayLink driver, connect through USB-C to my Probook 470 G5 and connect 3 FHD screens on the dock.

Problem still occur, I can get 2 screens working but not all 3 in the same time.

When I turn on computer, 2 screens are working from DisplayPort but not from HDMI. If I remove one Displayport cable, dock allow HDMI port and work with remaining DisplayPort. So only 2 screens can work in the same time. No matter where they are connected.

After searching my answer on the web I get a next conclusion. 2 screens work only because of DisplayLink chip in the dock. For third screen dock need DisplayPort Alt mode. I have checked, Probook 470 G5 have USB 3.1 Type-C Gen 1 (Power Delivery, DisplayPort).

Otherwise dock works just fine, peripheral and charging through USB-C work also.

I have tried third screen to connect on my laptop directly through HDMI port. It work just fine together with 2 screens from the dock and this is only configuration that work for 3 screens.

How to get 3 screens working through dock?

0 Kudos
Highlighted
Level 2
18 16 2 3
Message 4 of 6
Flag Post
HP Recommended

@Mikac

 

Make sure you update the firmware for the D6000 dock:

https://www.dell.com/support/home/us/en/04/drivers/driversdetails?driverid=jw5xm

Highlighted
Level 2
18 16 2 3
Message 5 of 6
Flag Post
Highlighted
Author
New member
3 2 0 0
Message 6 of 6
Flag Post
HP Recommended

@James_SCH

 

Updating to latest firmware was solved my issue.

All three outputs now working just fine.

Thank you for your help.

0 Kudos
Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation