I bought 4x32 ram for my zbook fury g8 15" but it won't boot after I install them.

[faridandonie]

I bought 4x32gb so-dimm 3200MHz ram (non-ecc per site spec recommendations) for my zbook fury g8 15" but it won't boot after I install them.

This is the ram model: TEAMGROUP T-Create TTCCD464G3200HC22DC-S01 RAM (DDR4, SODIMM, 2 units of 32 GB, 3200MHz(PC4- 25600)

If I install 1, it does boot but after installing the second one (I did check I'm installing in the right slot order), it won't boot and it just turns on the fans to max speed. I installed the 16GB ram it had from stock on the second slot and it does boot. I also tried swapping rams in case one was faulty, but it boots with every ram on slot 1, it just doesn't boot when adding a second 32gb ram. 

Specs say it can be upgraded upto 64gb ecc and 128 non-ecc, so I have no clue what's happening or if I should give up and return them and ask for 4x16 (I really don't want to have only 64gb ram if I can have 128gb).

Please help! Thanks!! 

[banhien]

@faridandonie 

Do you use 128 GB DDR4-3200 non-ECC SDRAM ? For example

                   https://eu.crucial.com/memory/ddr4/ct32g4sfd832a/ct24542182

Regards.

[faridandonie]

Yes, this is the link to the ram I bought:

https://www.amazon.com/TEAMGROUP-T-Create-Classic-SODIMM-3200MHz/dp/B09JSQB2MH

[banhien]

@faridandonie 

I can't find non-ECC SDRAM  from those links.

Regards.

[faridandonie]

Just do a quick search with ctrl F "non ecc" and you will see in module type description it says it's non ecc 🙂 

[banhien]

@faridandonie 

Not all RAM sticks are the same. Have you tried Crucial RAM (as it says compatible guaranteed) as mentioned above ?

Regards.