-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- I want to know if there is a way to add a nvme or PCIe SSD t...

Create an account on the HP Community to personalize your profile and ask a question
01-13-2022 08:38 PM - edited 01-15-2022 07:09 AM
HI! I'm looking to upgrade my HP Beats Special Edition Notebook - 15-p390nr from an HDD to an SSD. I already know I can use the 2.5 SATA form factor SSD. Now I would like to know, since my CPU-Z app says that I also have a PCI-Express 3.0 (8GT/ s), if there is a way that I can plug in an nvme SSD (or preferably a PCIe SSD) into it and use it as the boot drive, cuz it's way faster then the 2.5 form factor. And if it's possible, what compromise would I be making? Cuz it seems that's it's already in use. I don't know what device is using it.
Thanks for your support!
Solved! Go to Solution.
Accepted Solutions
01-15-2022 09:14 PM
I don't know if you can use a M.2 drive through the wi-fi card's port, however, unless you use a NVMe drive, which I do not think you can do that way (they are keyed differently), you will see little to no performance bump over a 2.5" SATA SSD. Non-NVMe M.2 drives are SATA drives, just smaller in form factor and interface through the PCIE. I would simply opt for a larger capacity 2.5" SATA SSD.
01-13-2022 08:55 PM - edited 01-13-2022 09:00 PM
The m.2 slot on your motherboard only supports SATA 3. All computers have a PCIe bus, It is the common motherboard interface for personal computers' graphics cards, hard disk drive host adapters, SSDs, Wi-Fi and Ethernet hardware connections. According to your Service Manual - http://h10032.www1.hp.com/ctg/Manual/c04511833.pdf it shows the following-
Support M.2 SATA-3 (NGFF)
M.2 SATA configurations(TLC)
256 GB M2 SATA
Later chipsets used the m.2 interface to use the PCIe bus for faster transfers. Yes, a PCIe ssd is faster than a SATA 3 version, about the same speed increase as SATA 3 ssd over a mechanical hard drive.
17-cp0097er
HP Envy 27-b014
01-14-2022 05:34 AM - edited 01-14-2022 05:37 AM
Ok. I've looked at the service manual you sent which is very informative. My PC is a Notebook Pavilion 15. It's motherboard doesn't have M.2 slots according to the manual (I'm using AMD, not the Intel model). But since I don't use ethernet at all on my laptop, can I remove the ethernet hardware and replace it with a PCIe SSD?
NB: This is my specific model HP Beats Special Edition Notebook - 15-P390nr
01-15-2022 06:59 AM
I would like to take a minute again to thank you for your great support. I did some more research in the service manual and elsewhere, and it seems you are absolutely correct. But I somehow don't get the impression that my question was properly answered.
- I wanted to know if there's something I could remove, like the ethernet card or something in order to free a pcie and use it to plug a pcie ssd.
01-15-2022 04:45 PM - edited 01-15-2022 05:11 PM
I remember seeing it somewhere on the web. I'll post the link if I come across it again later. The person had to use an adapter to convert the mpcie slot. I did a lot of researches on that, and I still can't make my mind on a proper solution.
Here's what I found:
https://linustechtips.com/topic/772848-replace-wifi-card-with-ssd/
https://linustechtips.com/topic/772848-replace-wifi-card-with-ssd/?do=findComment&comment=12862253
01-15-2022 09:14 PM
I don't know if you can use a M.2 drive through the wi-fi card's port, however, unless you use a NVMe drive, which I do not think you can do that way (they are keyed differently), you will see little to no performance bump over a 2.5" SATA SSD. Non-NVMe M.2 drives are SATA drives, just smaller in form factor and interface through the PCIE. I would simply opt for a larger capacity 2.5" SATA SSD.