• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Webcam Not Working? Advanced Fixes for HP Notebooks! Click here to view the instructions!
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
HP Recommended
HP ZBook Firefly 14 inch G10 A Mobile Workstation PC (752N3AV)
Microsoft Windows 11

I just wanted to know if my HP Zbook Firefly 14 G10 with a Ryzen 7 PRO 7840HS and a FHD screen would be able to support a 40-pin cable (N09041-001) instead of the regular 30-pin cable that it comes with. I want to do this so I can install a Dreamcolor display onto the laptop. Should I worry about any BIOS compatibility issues I may run into as well and maybe even HP firmware?

1 ACCEPTED SOLUTION

Accepted Solutions
HP Recommended

@Gooblet67 

 

When wrong part(s) machine won't work OR does not work as desinged

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




View solution in original post

3 REPLIES 3
HP Recommended

@Gooblet67 

 

It has few options as shown on page 20 of the following manual, none of them is FHD:

 

            https://kaas.hpcloud.hp.com/pdf-public/pdf_7912573_en-US-1.pdf

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




HP Recommended

Hi, I’m sorry for the mixup I was being a bit wrong by saying it’s an FHD screen when it’s WUXGA. Your answer had me a bit confused so I’ll try to rephrase my question since I may have gone on a little bit originally.

 

I want to install the 40 pin cable mentioned earlier into my laptop which originally has a 30 pin cable for the display, will I run into any problems while doing this? Is there problems such as the BIOS or firmware? Will I even be able to plug in the 40 pin cable to the motherboard? Thank you for your time answering these btw!

HP Recommended

@Gooblet67 

 

When wrong part(s) machine won't work OR does not work as desinged

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.




† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.