-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Common problems for Battery
We would like to share some of the most frequently asked questions about: Battery Reports, Hold a charge, Test and Calibrating Battery . Check out this link: Is your notebook plugged in and not charging?
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
13
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Page 32 and 33 show the part numbers and the i5 is listed
http://h10032.www1.hp.com/ctg/Manual/c05087748.pdf
The difference between (for example) 909168-001 and 909168-601 is the 601 is for windows and has something in the bios for licensing of windows. There is more to it then that.
If the replacement laptop is new or "open box' it has not been setup. Depending on the motherboard you may have to enter a code string "featurebyte" to set the features. A used motherboard will already have been programmed and have been activated for windows.
I recommend you get the same motherboard with same i3 cpu
if the bios has been corrupted lit is possible to program using an inexpensive USB programmer with a clip that attaches to the chip. Some shops can do this.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
HP Recommended
Page 32 and 33 show the part numbers and the i5 is listed
http://h10032.www1.hp.com/ctg/Manual/c05087748.pdf
The difference between (for example) 909168-001 and 909168-601 is the 601 is for windows and has something in the bios for licensing of windows. There is more to it then that.
If the replacement laptop is new or "open box' it has not been setup. Depending on the motherboard you may have to enter a code string "featurebyte" to set the features. A used motherboard will already have been programmed and have been activated for windows.
I recommend you get the same motherboard with same i3 cpu
if the bios has been corrupted lit is possible to program using an inexpensive USB programmer with a clip that attaches to the chip. Some shops can do this.
Thank you for using HP products and posting to the community.
I am a community volunteer and do not work for HP. If you find
this post useful click the Yes button. If I helped solve your
problem please mark this as a solution so others can find it
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community