Performance test stops by itself in ALM

[Bhartendu]

When run a performance test in ALM 11.0,  sometimes it  itself stops. I am losing many tests because of this error.  I  am listing the error it logs,  any help to fix this error is appreciated.

1) Failed to collect statistics  from Controller, internal error: 'Retrieving the COM class factory for component with CLSID {E933439A-81A1-11D4-8EEE-0050DA6171E8} failed due to the following error: 800706bf.'
2) Failed to collect statistics  from Controller, internal error: 'Failed to get report manager from controller.'
3) Failed to collect statistics  from Controller, internal error: 'Failed to get report manager from controller.'
4) Run 192 (timeslot 2003) changed state from Running to Stopping.
5) Failed to stop test. Reason: 'There was no endpoint listening at net.pipe://localhost/CntrlService/Service that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. The pipe endpoint 'net.pipe://localhost/CntrlService/Service' could not be found on your local machine. '

[WMLong]

I got a very similar error when attempting to run a 2-hour test in Performance Center 11.0. The error caused my scenario to fail. the error message was 'Failed to stop test. Reason: 'There was no endpoint listening at net.pipe://localhost/CntrlService/Service that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. The pipe endpoint 'net.pipe://localhost/CntrlService/Service' could not be found on your local machine. '

[AR6310]

what is the reason for this and how this issues was resolved , appreciate your timely help.

I am also in same situation now .

'There was no endpoint listening at net.pipe://localhost/CntrlService/Service that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. The pipe endpoint 'net.pipe://localhost/CntrlService/Service' could not be found on your local machine. '

Thanks in Advance

[chilglord · Accepted solution]

Hi,

Try to disable in diagnostic tab the J2EE/.Net diag, 🙂

Chilglord 

[OmegaSupreme]

Did this solution work?  

[chilgl0rd]

Yes it worked for me.

[Bhartendu]

Yes it resolved the problem for me.  Thanks

[huzi_linas]

it doesn't work for me. Any other solution?

[kevin-t]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue. 
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about forum posting, please feel free to send me a private message!

Thank you

[Adi23]

How do we disblae the same in the ALM-Performance Center ? by default the J2ee diagnostics is ennabled.