Power of after bootup

[Jwick1973]

PC boots up and runs fine when plugged in can unplug and will continue to run. If you unplug the PC turn it on it starts to boot up mode and then Powers off

[TEJ1602]

@Jwick1973, Welcome to HP Support Community!

Reset the PC. Refer to the document HP Notebook PCs - How to Power Reset your Laptop​ for help.

Let's try reinstalling the Microsoft ACPI-Compliant Control Method Battery 

1) In the search box, type, and open “Device Manager”. 

2) Expand “Batteries”. 

3) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

4) Click on “Uninstall”. 

5) At the prompt put a check in the box to remove the current driver 

6) Shutdown the computer. 

7) Remove the battery for a minute and then put it back in. 

😎 When the computer comes back up it should automatically find the driver. 

9) Go to Device Manager. 

10) Expand Batteries. 

11) Right-click the "Microsoft ACPI-Compliant Control Method Battery" that is listed there. 

12) Click "Search automatically for updated driver software". Do the same thing with Microsoft ACPI-Compliant Embedded Controller. 

Also, try updating the computer - 

Step 1 Windows Updates - 

1) In the search box, type, and open Windows Updates. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

Step 2 HP Support Assistant Updates - 

1) In the search box, type, and open HP Support Assistant. 

2) Check for updates. 

3) If the updates are available, click on install and restart the computer. 

Keep me posted.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!