Printing

[RobertAdams548]

After a windows 10 update i am unable to print on my wireless HP3632 all in one printer. It is not a network/wifi issue as i can print a test page using HP support app and i can print from my google chrome book. Tried re-installing drivers etc and Microsoft troubleshooter with no success. When i try to print a pdf document the following message displays in the print window "Unexpected configuration problem 0x80004005"

[sandytechy20]

@RobertAdams548

Welcome to HP support community.

Perform a power reset

1. Turn on the printer, if it is not already on.
2. Wait until the printer is idle and silent before you continue.
3. With the printer turned on, disconnect the power cord from the rear of the printer.
4. Wait at least 30 seconds.
5. Plug back the power cable straight to a wall outlet without any surge protector and printer.
6. Turn on the printer.

Perform root level uninstalltion to remove all the printer related software's.

• In Windows, search for and open Programs and Features.
• Select your HP printer.
• Select Uninstall.
• In Windows, search for and open Devices and Printers.
• In the Devices and Printers window look for your HP Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”
• Open up the run command with the "Windows Key + R" key combo.
• Type printui.exe /s and click OK.
• Click on Drivers tab.
• Look for HP Printer driver. If you see it click on it and click Remove at the bottom.
• Select OK.
• Remove all instances of the same.
• Select Apply and OK on the Print Server Properties windows.
• Close Devices and Printers. 
• Restart the PC again.

Download and install printer full feature driver

Click here to download the driver.

Update the printer firmware

Refer this HP document for the steps to update:- Click here

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.