Showing results for 
Search instead for 
Did you mean: 
New member
2 1 0 0
Message 1 of 3
Flag Post

SSD is no longer recognized after a boot from usb pen with Acronis on

HP Recommended
HP Pavilion - 15-ck030nl
Microsoft Windows 10 (64-bit)

As in the subject, with Acronis no any kind of backup has been started.

I've tryed to remove SSD and read it on external M.2 PCIe usb adapter but is not recognized.


Level 16
Level 16
28,589 28,509 2,614 6,257
Message 2 of 3
Flag Post
HP Recommended


So, was the drive working OK before you booted from the Acronis USB stick?  IF so, what was the intention with using the stick?


Also, is the adapter m.2 NVMe, not m.2 SATA?

***If my post helped, click the White thumbs-up symbol to say thanks***

***Please mark Accept As Solution if my post solved your problem***

I am a volunteer and I do not work for, nor represent, HP
New member
2 1 0 0
Message 3 of 3
Flag Post
HP Recommended

Hi WAWood,


yes, my notebook pavillion was working fine.

My intention was to do a clone of the current M.2 Disk (512Gb) to replace it with bigger one (1Tb).


The adapter is for m.2 NVMe PCIe and it read correctly the new one 1 Tb m.2 disk


At the moment my Pavillion was working with the new 1 Tb m.2 SSD.

But all my data was on old 512GB and i need to recovery them.


Specs on old m.2 ssd reports that there is an AES 256 encryption.

Maybe a corrupted TPM area issue ?


Thanks in advance.




0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation