Screen upgrade victus 16 dx0000

[Pudú]

I wanna know if its possible to upgrade my screen to a better one, I know it has eDP 1.2, and that maybe ill have to change the connector, but is it possible to change to a 144hz or 165hz screen?

[Garp_senchau]

@Pudú, Welcome to HP Support Community,

Thank you for posting your query; I’m here to help by guiding you through steps to resolve this issue

Compatible Display

0.9 cm (16.1 in ), antiglare, WLED, ƯDt (3.2 mm), narrow bezel
Full high-deƭnition (FHD) (1920 × 1080), Ultra Wide Viewing Angle (UWVA) NTSC 45, eDP 1.3, 250 nits, 144 Hz
FHD, UWVA sRGB 100, eDP 1.2 without PSR, 300 nits
FHD, UWVA sRGB 100, low blue light, eDP 1.3 + PSR, 300 nits, 144 Hz
FHD, UWVA 45, eDP 1.2 without PSR, 250 nits
Quad high-deƭnition (QHD) (2560 × 1440), UWVA sRGB 100, low blue light, eDP 1.4 + PSR, 300 nits, 165 Hz

I hope this helps.

Please feel free to reply here if you have any questions or if you need further clarification on any of the steps. 

Take care and have a good day. 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

[Huffer]

There however 3 different cables so its not possible to swap in just any of the panels into just any unit in the series:

For use with FHD, 60 Hz panels M81348-001
For use with FHD, 144 Hz panels M81347-001
For use with QHD, 165 Hz panels M84786-001

The cable has to be compatible with the screen