-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Notebooks
- Notebook Hardware and Upgrade Questions
- Re: Screwdriver size

Create an account on the HP Community to personalize your profile and ask a question
03-21-2019 01:01 PM
Hi guys,
I want to open my laptop(HP Omen - 15-dc0850nd ) and clean all of the accumulated dust. I'm going to order a screwdriver online and I have no idea what size I should look for..Any suggestions?
03-21-2019 01:16 PM
You need more than one size. Please use the manual called Maintenance and Service Guide on the following link
https://support.hp.com/au-en/product/omen-by-hp-15-dc0000-laptop-pc/20329817/manuals
Regards.
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
03-22-2019 04:21 AM
Thank you for the reply!
There are 2 different guides on this link - Maintenance and Service Guide in which the mentioned tools are Flat-bladed screw driver, Magnetic screw driver, Phillips P0 screw driver - and OMEN by HP 15 Laptop PC - Maintenance and Service Guide(which should be more accurate for my machine, right?) with recommended tools as follows - Non-marking, non-conductive pry tool and Phillips P1 screwdriver.
I noticed that all of the screws on the back of the case are the same size and all I want to do is open the laptop case and blow out the dust with compressed air without taking apart anything else. So do I need all of the previously mentioned screwdrivers from the 1st guide or only the Phillips P1 screwdriver ?
Perhaps there is a complete tool set which has everything one needs to disassemble a laptop?
Regards,
Kristian