05-09-2016 08:20 AM - last edited on 05-09-2016 08:24 AM by kevin-t
Hello, My Envy Dv7 (SerialNo: [Personal Information Removed]) has lost the screw (back side top left corner, see attached picture). To be able to buy a new one I need to know the dimensions for this screw. I have been in contact with Convena (that handles spear parts for HP devises) they cannot help me with this issue :-(
Best regards /Rickard
Solved! View Solution.
Re: Spear part to a HP Envy Dv7 NoteBook
05-30-2016 09:14 AM
Thanx for the information. I have checked the hinge and it is OK.
All I need is the screw. I consider this issue solved now.
05-09-2016 08:43 AM
Unfortunately it is more than the screw. Screws do not just fall out. First something has to strip the screwhole. That is usually a hinge problem. In any event if we had the full model number of the laptop we could link you to the manual which does show the dimensions of all chassis screws, and the correct hinge part numbers.
05-11-2016 09:57 AM
See p. 64. Chassis screws are:
Phillips PM2.5×8.5 screws
You can get a whole set for less than $5 on eBay:
As I said you are going to find that the screw even when replaced will not stay put. You likely also need to replace these:
Display Hinge Kit (includes left and right hinges and brackets) 681977-001
If this is "the Answer" please click "Accept as Solution" to help others find it.
- HP Notebook PCs - Reducing Heat Inside the PC to Prevent Overheating
- HP Notebook PCs - Computer Does Not Start and Emits an LED or Beep Code
- HP Notebook PCs - How to Power Reset your Laptop
- HP PCs - Computer Is Slow (Windows 10)
- HP Notebook PCs - Troubleshooting No LED Lights Glow During Startup or Boot